Aerofoam® XLPE CLAD sheets & rolls are made from closed cell closed cell cross linked polyolefin foam coated with a strong jacketing, which replaces costly and complex aluminum and stainless steel sheet facings. The foam has excellent properties in terms of condensation control, long term thermal block and sound absorption.

The Aerofoam® XLPE CLAD rolls & sheets have a very good dimensional stability, showing a “memory effect” (they tend to come to their original shape after being compressed).

The Aerofoam® XLPE CLAD rolls & sheets represent an economical solution to the expensive and labor intensive aluminum or stainless steel cladding. Some of the benefits are the following: less skilled labor required, fast installation (50% faster than aluminum cladding), light weight material (0.34 Kg/m2), safe to use (PVC jacketing – no safety equipment required), easy to cut, no drill required (light punching tool is enough), no power tools required, easy and light to lift and carry, jackets can be cut on-site without waste (on a cutting table), space-saving storage.

Download Catalogue





Material:         closed cell cross linked polyolefin foam with PVC jacketing
Density:          30 kg/m³
Thickness:      5 mm, 10 mm, 12 mm, 15 mm, 20 mm, 25 mm, 30 mm, 40 mm, 50 mm
Width:            1.2 m (1 m also available upon request)
Length:          Rolls: 20 m (any length possible) | Sheets: 2.4 m
Color:             grey / black / peach / red / green / blue / white with silver jacketing



  • Indoor and outdoor pipe or duct applications
  • Tanks, reservoirs

In order to install Aerofoam® XLPE CLAD in a professional manner, please consult the Installation Handbook. In order to get your free copy please register here.



  • UV and corrosion resistance;
  • Fire rated “CLASS O” as per BS 476 Parts 6 & 7;
  • Very low water vapor permeance (0 perms);
  • Water tight due to the preapplied alupet foil;
  • Very low water absorption rate (0.3% by volume);
  • High thermal efficiency (λ24˚ C = 0.034 W/mK; λ46˚ C = 0.036 W/mK);
  • Wide temperature range (from -50˚ C to +105˚ C);
  • Chemical resistance – resistant to most chemicals (sodium, silica, fluoride, chloride, etc.);
  • Antibacterial & antifungal;
  • Environmental friendly – ODP = 0 and GWP < 5;
  • Very low VOC emission level ( < 4 µg/m2/hr in 24 hours);
  • Good mechanical resistance;
  • Sound absorption properties;
  • Easy and fast to install;
  • Aesthetical look.



xlpe test reports

To receive a copy of the specific test report please register here.



aerofoam xlpe clad sheet

Tolerance: Thickess ± 1 – 1.5 mm; Length: ± 2 cm

For more information please download the catalogue here.

Application Training

Career Opportunities

If you are seeking a challenging and growth oriented job opening, Hira Industries LLC is at all times on the watch for talented, capable and enterprising professionals. Please send your resume/CV on